N or N-Type connectors are popular across a wide range of wireless technologies, particularly those sub-6 GHz.

This N Female connector is designed for an ordinary crimp and solder attachment to LMR-240 and equivalent series coaxial cables. Ternary Alloy plating provides this connector superior PIM performance and extended operation to 6 GHz.

Installation is simple. After preparing the cable, the connector is slid over the cable until the cable's centre conductor sits within the solder-cup that has been pre-fitted inside the connector. The conductor is then soldered in place. A standard 6.5 mm (0.255") hex die is used to crimp the ferrule.

This N Female connector for L-240 series cables is manufactured by Powertec as a high performing yet economical connector for L-240 / LMR-240 series coaxial cables.

RF Connector Interface

RF Interface Body Shape Mounting

RF Specification

Start Frequency
0 GHz
Stop Frequency
3 GHz
RF Operating Voltage
≤ 500 Vrms
Input Impedance
50 Ω
Inner Contact Resistance
≤ 1 mΩ
Insulation Resistance
≥ 5000 mΩ
Outer Contact Resistance
≤ 0.25 mΩ

VSWR Measurement

Frequency VSWR
3000 MHz
≤ 1.2:1

Physical Specification

Cable Group
Body Material
Body Plating
Insulator Material
28 × 19 × 19 mm
18.5 g
Conductor Attachment
Contact Material
Contact Plating
Min. Operating Temperature
-40 °C
Max. Operating Temperature
85 °C
Mating Cycles
> 500
N2-C-L24 CAD Drawing

Downloadable Resources

Powertec is a wireless technology manufacturer and systems integrator based in Australia. Operating since 1995, Powertec has grown to become the leading wireless technology distributor in its region, and a leading Infratech systems developer. Supporting over 1500 partners the company provides procurement, design, project management, and support services across Australia, New Zealand, Pacific ...