Powertec Wideband 4G & IoT Bulkhead Antenna, 700 to 2700 MHz

VDIP-6927-2.N2 is a wideband 4G LTE4G LTE: 4G LTE (Long Term Evolution) or the E-UTRAN (Evolved Universal Terrestrial Access Network), introduced in 3GPP Rel. 8, is the radio access component of the Evolved Packet System (EPS) - a purely IP based mobile network standard. As an evolution to 3G UMTS, 4G LTE shares many similarities, such as… antenna that covers cellular frequencies in the range from 700 to 2700 MHz. In additional to 3G and 4G wireless applications, the antenna covers IoT technologies such as LoRaLoRa: LoRa® is a proprietary physical layer wireless protocol developed by US semiconductor corporation Semtech, designed to facilitate low power, low data rate communications in the unlicensed ISM bands between 137 and 1020 MHz.Unlike other IoT standards such as NB-IoT and LTE-M which are constructed as…, and others using unlicensed bands such as 868 and 915 MHz. ISM 2.4 GHz WiFi and Bluetooth 3.0 are also fully supported.

The model has a 1.5 dBi gain on the lower 698 to 960 MHz range and 2.5 dBi gain on the upper 1710 to 2700 MHz range. These peak gainpeak gain: Gain is often incorrectly used as a one-stop measure of performance comparison between antennas, where the model with the highest gain figure represents the highest performance. As its alias suggests, gain represents the directivity of an antenna in the sense that performance is increased in… figures are ideal for maintaining a near-spherical radiation pattern, very important for use in IoT, machine telemetry, and metering applications.

This antenna has a robust construction, machined from stainless steel and with an impact resistant plastic radome. Mounting can be achieved through the antenna's stainless steel N FemaleN Female: The N Female RF connector, commonly known as the jack, is characterised by its central receptacle and an outer shell with a hexagonal or knurled design, complemented by a threaded coupling mechanism. It's designed for compatibility with the N Male connector, which has a corresponding pin. bulkhead connector, or by using the supplied stainless steel pole / wall mount bracket.