Description
The Cel-Fi GO G32 is a highly effective repeater designed to improve Optus mobile voice, text, and data coverage. This model has been designed to improve both Optus 3G and 4G services in a matter of minutes.
Setting up the repeater to improve indoor mobile coverage is simple. The unit has an input connection and an output connection which are set up as follows:
- Input connection: connected to roof mounted antenna by cable
- Output connection: can either connect directly to an antenna, or can use one or more cables to distribute signal elsewhere.
The Cel-Fi GO G32 works by decoding and amplifying weak Optus signal detected by the roof mounted antenna. This signal is then boosted up to 100 dB using a linear amplifier and output through the antenna or series of antennas connected to the output port.
Unique to the GO G32, the repeater is IP66 ingress protection rated and built tough for use in outdoor and tough environments.
The Optus Cel-Fi GO G32 can operate on two frequency bands simultaneously, providing either 3G and 4G coverage, or 2C 4G LTE-Advanced for higher data speeds.
RF Specification
Supported Bands
| Frequency Band | Duplex Method | MIMO | Max. Channel Width | Downlink Start Frequency | Downlink Stop Frequency | Uplink Start Frequency | Uplink Stop Frequency |
|---|---|---|---|---|---|---|---|
|
20 MHz
|
2110 MHz
|
2170 MHz
|
1920 MHz
|
1980 MHz
|
|||
|
20 MHz
|
1930 MHz
|
1990 MHz
|
1850 MHz
|
1910 MHz
|
|||
|
15 MHz
|
869 MHz
|
894 MHz
|
824 MHz
|
849 MHz
|
|||
|
20 MHz
|
2620 MHz
|
2690 MHz
|
2500 MHz
|
2570 MHz
|
|||
|
15 MHz
|
925 MHz
|
960 MHz
|
880 MHz
|
915 MHz
|
|||
|
20 MHz
|
791 MHz
|
821 MHz
|
832 MHz
|
862 MHz
|
RF Connections
| RF Connector Function | Quantity | RF Interface | Notes |
|---|---|---|---|
|
Donor Input
|
1
|
||
|
Service Output
|
1
|
Network Interfaces
Wireless Interfaces
Ethernet Interfaces
Physical Specification
Device Power Specifications
Power Interface
| Power Connector | Min. Input Voltage | Max. Input Voltage | Voltage Type | Input Current |
|---|---|---|---|---|
|
DC Coaxial, Type A, Female 5.5 x 2.5 mm
|
9.6 V
|
16.5 V
|
DC
|
2 A
|
Drawing
Downloadable Resources
Nextivity, Inc. develops and sells in-building cellular coverage technology products and solutions. The Company helps wireless subscribers and increases radio frequency network capacity for mobile network operators. Nextivity operates in the State of California.
Nextivity is best known for its Cel-Fi range of mobile repeater solutions which provide low cost improved in-building coverage solutions.