MIMO (Multiple-In, Multiple-Out) is a radio access technology that uses multiple transmitters and multiple receivers to communicate multiple streams of data over the same frequency band simultaneously.

The demand for mobile data continues to explode, with an incredible projected year-on-year growth of 46% (Statista, 2019). Mobile network operators are continually pressed to find new ways to get more data through the air. Cellular-band radio frequency spectrum is an incredibly finite resource and accordingly buying exclusive operating rights commands a very high price. For example, in the US the price per 1 MHz of 4G / 5G suitable spectrum in 2017 pushed USD $240 million.

There are four approaches to increasing capacity without having to acquire more spectrum. All four circle around the idea of increasing something known as spectral efficiency. Spectral efficiency, measured in bits per second per Hertz (b/s/Hz), refers to how much information can be transmitted each second over a given width of radio spectrum. Limits to spectral efficiency are governed by the Shannon-Hartley Theorem.

Cell Densification

In even a small town there may be thousands of mobile data users, from ordinary pedestrians, to people driving in vehicles, to small IoT devices built into advertising signs and vending machines. While a single cell tower may be sufficient to cover this small town, doing so would put each device in competition with each other for airtime. The radio access network would have to then juggle a complicated schedule of who transmits when and how many resource blocks to dedicate to each user. Some users would be far from the cell site and have to transmit at a slower rate in order to make sure their information was sent successfully.

By adding additional cell towers in key geographic locations the total number of users will be divided between all sites. Each site now schedules a smaller number of users, meaning more airtime per user. This seems reasonably straight-forward, however as these new sites are operating on the same frequency band they must be carefully positioned and the transmit power of each base station coordinated to ensure interference is kept to a minimum.

Adding sites in weak signal areas allows users, who were originally transmitting at a slower rate and consuming more airtime per unit of data, to communicate with the base station at a faster rate and improving the number of bits per second.

Improve UE Signal Strengths

A common approach to increasing network capacity is employing the use of external antennas for stationary devices. This can come in a few forms, from connecting high gain antennas to user equipment sitting on the cell edge, to setting up the network to operate in a Fixed Wireless Access (FWA) mode. By correctly positioning each user's antenna the receive signal strength is increased in both directions. With a stronger and cleaner signal the device can communicate at a faster rate using a higher order modulation and coding scheme.

This improvement is not insignificant. The difference between the slowest and fastest (least complex and most complex) transmission schemes is anywhere from a 12 to 49-fold increase (depending on LTE/A/A-Pro/NR CQI mapping). This means up to a 49x increase in capacity is achievable simply by lifting users from low schemes to high schemes.

Upgrade to Higher Order Modulation

Without diving too deep into the topic, at a very basic level modulation represents the amount of information that can transmitted in a given unit of time. Modulation efficiency is measured in bits per symbol (b/symbol). In the context of digital transmission a 'symbol' refers to an identifiable pulse or tone, with the symbol rate representing the number of waveform changes occurring per time unit.

During the course of ordinary communication a 4G or 5G device will continually change its modulation scheme to reflect changes in the transmission conditions. If the transmission path becomes obstructed by objects, or the channel becomes noisy from interferers, the device will alert the base station which will look up a CQI Index to determine what modulation and coding scheme matches the newly reported signal quality.

Under clean conditions where signal strengths are good and channel noise is minimal the device will operate at the maximum modulation scheme available. As digital signal processing technology improves over time new modulation schemes become useable. Until recently (3GPP Rel. 12) the maximum downlink modulation scheme was 64QAM, meaning that even under perfect channel conditions devices were limited to 6 b/symbol. LTE-A Pro and 5G NR introduced 256QAM which provides 8 b/symbol resulting in an instant 33% increase in spectral efficiency for those devices operating under clean conditions.

A key advantage of this approach is that often the upgrade could come in the form of a software upgrade. The downside is that the new modulation scheme mostly affects those users operating under near perfect conditions. Of course with some users completing their data transmissions at faster rate the link utilisation is lower, freeing up scheduler resources that can be then dedicated to users suffering slower rates.

Multiple Antenna Techniques (MIMO)

This brings us to our final approach. MIMO involves multiple transmission antennas communicating with multiple receive antennas over the same frequency domain. Ordinarily two devices communicating on the one frequency causes a collision, or at the very least a rise in noise floor. MIMO uses the concept of "space" diversity to allow multiple transmissions over the one frequency without causing this negative impact. Spatial diversity involves physically separating antennas so that independent transmission paths can be established with the receiver.

The simplest form of antenna configuration is called SISO - Single In, Single Out. A device's RF front end is connected to a single antenna which establishes one communication link (referred to as a stream) to the receiving device's antenna. This forms a 1:1 relationship between the two devices antennas.

MIMO - Multiple In, Multiple Out differs in that it uses more than one antenna at each end. Relationships can be one-to-many, or many-to-many. The most common form is 2x2 MIMO, which refers to two transmit antennas establishing two communication links (streams) with two receive antennas. It is important to note that the device may choose to not use all antennas, instead constructing fewer spatial streams depending on the transmission environment. This concept is important to understanding Massive MIMO.

As a partial implementation, some technologies such as 3G use transmit or receive diversity which refers to using a single antenna at one end but multiple at the other. These configurations work best in multipath environments where the two antennas can detect and combine signals over different propagation paths.

  • Transmit Diversity: The use of two antennas at the base station which send identical streams of data to a single receiver antenna using Space Time Block Coding (STBC). The burden of complexity is borne by the base station instead of the user equipment.
  • Receive Diversity: The use of two antennas at the receiver which work in unison to help reconstruct the original base station transmission.
SISO vs MIMO Channel Capacity Comparison [1]

Types of MIMO

Design Definition
1x1 SISO

A wireless configuration that uses one antenna for both transmission and reception. This simplest form of antenna configuration enables a single data stream between the transmitter and receiver.

2x2 MIMO

A wireless communication configuration that uses two antennas, each capable of both transmission (the multiple inputs) and reception (the multiple outputs). This setup allows the transmission and reception of up to two independent data streams ...

3x3 MIMO

Refers to a wireless communication configuration that uses three antennas, each capable of both transmission (the multiple inputs) and reception (the multiple outputs). This arrangement allows the simultaneous transmission and reception of up to ...

4x4 MIMO

A wireless communication configuration that uses four antennas, each capable of both transmission (the multiple inputs) and reception (the multiple outputs). This arrangement facilitates the simultaneous transmission and reception of up to four ...

8x8 MIMO

An advanced wireless communication setup which utilises eight antennas for both the transmitting end and receiving end. This enables the simultaneous transmission and reception of up to eight unique data streams within the same frequency band. The ...

Massive MIMO

A wireless communication architecture that uses a large number of antennas (often denoted as 'massive' due to the scale, typically in the order of tens or even hundreds) at the transmitter and receiver to facilitate multiple simultaneous data streams ...