Description
This is a 4G repeater subassembly that can be installed in an Integrated Platform alongside a 24 Vdc Power System and Winch-Up Mast. The system uses a Cel-Fi G41 repeater, which is designed to be used while stationary. The Low-Band panel antenna provides a beam of coverage typically out to about 400 metres (input signal quality dependent).
It typically forms part of a BOM for a 4G Repeater Trailer or Skid. It contains all components necessary to "bolt-on" inside the electrical enclosure and onto the mast. This subassembly is designed for Winch-Up masts that have coaxial cables pre-installed inside the thermoformed harness.
This subassembly is designed for 24 Vdc power systems, and has a DC-DC converter to step the voltage back to 12 Vdc for the Cel-Fi repeater.
An Isolation Screen should ideally be installed to ensure maximum RF performance.
Powertec 4G Low Band H-Pol Panel Antenna, 698 to 960 MHz, 4.3-10 Female
Subcomponents
| Quantity | Subcomponent |
|---|---|
|
1
|
|
|
1
|
|
|
1
|
|
|
1
|
|
|
4
|
|
|
1
|
|
|
1
|
|
|
1
|
Downloadable Resources
Powertec is a wireless technology manufacturer and systems integrator based in Australia. Operating since 1995, Powertec has grown to become the leading wireless technology distributor in its region, and a leading Infratech systems developer. Supporting over 1500 partners the company provides procurement, design, project management, and support services across Australia, New Zealand, Pacific ...